Difference between revisions of "Renesas RX66T"
| Line 10: | Line 10: | ||
Programming the option setting memory at addr. 0x12_0040 is supported. |
Programming the option setting memory at addr. 0x12_0040 is supported. |
||
| + | ==User boot area== |
||
| − | '''Note:''' Programming of '''UB code A''' and '''UB code B''' in user boot area at 0xFF7F_FFE8 is '''not''' suppored |
||
| + | Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is '''not''' suppored |
||
Revision as of 16:36, 3 July 2019
This article describes device specifics of the Renesas RX66T series microcontrollers.
Requirements
- J-Link software V6.47e or later: Download
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files:
xxxxxxxxxxxxxxxxxxxxxxxx
Option-setting memory
Programming the option setting memory at addr. 0x12_0040 is supported.
User boot area
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is not suppored
