Difference between revisions of "Renesas RX66T"

From SEGGER Wiki
Jump to: navigation, search
Line 12: Line 12:
 
==User boot area==
 
==User boot area==
 
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is '''not''' suppored
 
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is '''not''' suppored
  +
  +
=Supported debug interfaces=
  +
The following debug interfaces are supported for the RX66T series:
  +
* JTAG
  +
* FINE

Revision as of 15:37, 3 July 2019

This article describes device specifics of the Renesas RX66T series microcontrollers.

Requirements

  • J-Link software V6.47e or later: Download

Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files:

xxxxxxxxxxxxxxxxxxxxxxxx

Option-setting memory

Programming the option setting memory at addr. 0x12_0040 is supported.

User boot area

Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is not suppored

Supported debug interfaces

The following debug interfaces are supported for the RX66T series:

  • JTAG
  • FINE