Difference between revisions of "Renesas RX72M"
| Line 4: | Line 4: | ||
* J-Link software V6.47e or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download] |
* J-Link software V6.47e or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download] |
||
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files: |
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files: |
||
| + | * [[File:FlashProgVerify_Renesas_R5F572MN_RX72M.zip]] |
||
| − | |||
| − | [[File:FlashProgVerify_Renesas_R5F572MN_RX72M.zip]] |
||
=Option-setting memory= |
=Option-setting memory= |
||
Latest revision as of 16:55, 3 July 2019
This article describes device specifics of the Renesas RX72M series microcontrollers.
Requirements
- J-Link software V6.47e or later: Download
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files:
Option-setting memory
Programming the option setting memory at addr. 0xFE7F_5D00 is supported.
Supported debug interfaces
The following debug interfaces are supported for the RX72M series:
- JTAG
- FINE
