The Renesas RZ/G2L microcontroller features a Cortex-A55 (single or dual) as main processors and a Cortex-M33 as co-processor.
By default, the Cortex-M33 is not enabled / held in reset. The J-Link software executes a device specific initialization sequence which enables the Cortex-M33 thus allows to debug the core out-of-the-box. Minimum software version: V7.22.
Not supported yet.
- Renesas RZG2L SWARC Module: https://wiki.segger.com/NXP_RZG2L_SWARC_Module
- Renesas RZG2L evaluation board: https://wiki.segger.com/NXP_RZG2L_SWARC_Module#Example_Project