The Renesas RZ/G2L microcontroller features a Cortex-A55 (single or dual) as main processors and a Cortex-M33 as co-processor.
By default, the Cortex-M33 is not enabled / held in reset. The J-Link software executes a device specific initialization sequence which enables the Cortex-M33 thus debugging via Cortex-M33 works out-of-the-box.
Not supported yet.
- Renesas RZ/G2L SMARC EVK: https://wiki.segger.com/NXP_RZG2L_SWARC_EVK
- Renesas RZ/G2L SMARC EVK: https://wiki.segger.com/NXP_RZG2L_SMARC_EVK#Example_Project