Renesas RZ/T2M-RSK

From SEGGER Wiki
Revision as of 13:58, 7 June 2022 by Erik (talk | contribs) (Created page with "__TOC__ This article describes specifics for the Renesas RZ/T2M-RSK evaluation board. 450px == Minimum requirements == * J-Link software V7.6...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the Renesas RZ/T2M-RSK evaluation board.

Renesas RZT2M-RSK.jpg

Minimum requirements

  • J-Link software V7.68 or later

Preparing for J-Link

  • Connect the J-Link to the SWD header (J13 or J20)
  • Power the board via external power supply / power jack (CN6)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Renesas RZT2M Connect.PNG

Example Project

TBD

SETUP

TBD

Retrieved from "https://wiki.segger.com/index.php?title=Renesas_RZ/T2M-RSK&oldid=11953"