Renesas RZ/T2M-RSK

From SEGGER Wiki

Revision as of 16:41, 7 July 2022 by Erik (talk | contribs) (→‎Preparing for J-Link)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Contents

1 Minimum requirements
2 Preparing for J-Link
3 Example Project
- 3.1 SETUP

This article describes specifics for the Renesas RZ/T2M-RSK evaluation board.

Minimum requirements

J-Link software V7.68 or later

Preparing for J-Link

Connect the J-Link to the debug header (J13 or J20)
Power the board via USB C (CN5) or external power supply / power jack (CN6)
Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Example Project

TBD

SETUP

TBD

Retrieved from "https://wiki.segger.com/index.php?title=Renesas_RZ/T2M-RSK&oldid=12438"