SAM E53/54 Xplained Pro

From SEGGER Wiki
Revision as of 14:11, 17 October 2018 by Sebastian (talk | contribs) (Created page with "'''Chip erase timeout with Atmel Studio''' When the Atmel SAM E53/54 Xplained Pro board gets powered through Target USB port, it can happen that Chip erase executed within At...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Chip erase timeout with Atmel Studio

When the Atmel SAM E53/54 Xplained Pro board gets powered through Target USB port, it can happen that Chip erase executed within AtmelStudio times out.

To fix this behavior it is necessary to power the board through the Debug USB port instead of the Target USB port. This behavior and the workaround have been confirmed by Microchip.