STM3241G-EVAL

From SEGGER Wiki
Revision as of 08:16, 31 May 2017 by Nino (talk | contribs) (Created page with "==Jumper settings to enable trace pins== In order to enable the trace pins on this particular board jumpers JP1 and JP2 need to be in a fixed position. * JP1: Connect PE4 to...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Jumper settings to enable trace pins

In order to enable the trace pins on this particular board jumpers JP1 and JP2 need to be in a fixed position.

  • JP1: Connect PE4 to trace connector CN13 as TRACE_D1 by setting JP1 on position 1-2
  • JP2: Connect PE3 to trace connector CN13 as TRACE_D0 by setting JP2 to position 1-2