Difference between revisions of "STM32H743I-EVAL"

From SEGGER Wiki
Jump to: navigation, search
(Sample projects)
(Sample projects)
Line 11: Line 11:
   
 
*[[Media:ST_STM32H743_ES_340_SWO_Example.zip|Embedded Studio SWO sample project with CMSIS DFP included]]
 
*[[Media:ST_STM32H743_ES_340_SWO_Example.zip|Embedded Studio SWO sample project with CMSIS DFP included]]
This example project does not require any extra settings by the user. The SWO stream can be viewed with e.g. JLinkSWOViewer which is included in the J-Link software and documentation package and is available for free. This project was created with Embedded Studio V3.40.
+
This example project does not require any extra settings by the user. The SWO stream can be viewed with e.g. JLinkSWOViewer which is included in the J-Link software and documentation package and is available for free.
   
 
* [[Media:STM32H7_IAR_SWO_Ozone.zip|IAR EWARM 8.22 sample project]]
 
* [[Media:STM32H7_IAR_SWO_Ozone.zip|IAR EWARM 8.22 sample project]]

Revision as of 12:54, 6 August 2018

SWO

SWO is supported on the STM32H743I-EVAL.

Requirements

In order to make SWO working correctly, min. J-Link software V6.33a is required. Previous versions are not guaranteed to work correctly with SWO.

Sample projects

The following sample projects that demonstrate SWO on the STM32H743I-EVAL are available:

This example project does not require any extra settings by the user. The SWO stream can be viewed with e.g. JLinkSWOViewer which is included in the J-Link software and documentation package and is available for free.

  • IAR EWARM 8.22 sample project
  • Note: IAR does not handle the special setup needed for this particular target device automatically so SWO printf will only work when using Ozone. The example project contains a Ozone configuration that will work out-of-the-box.