Difference between revisions of "STM32H743I-EVAL"

From SEGGER Wiki
Jump to: navigation, search
(Sample projects)
(Sample projects)
Line 14: Line 14:
   
 
* [[Media:STM32H7_IAR_SWO_Ozone.zip|IAR EWARM 8.22 sample project]]
 
* [[Media:STM32H7_IAR_SWO_Ozone.zip|IAR EWARM 8.22 sample project]]
* '''Note:''' IAR does not handle the special setup needed for this particular target device automatically so the project setting "CPU clock" must be set to 20 MHz when using 64 MHz default CPU clock. Any other value will not output the SWO printf stream.
+
* '''Note:''' IAR does not handle the special setup needed for this particular target device automatically so SWO printf will only work when using Ozone. The example project contains a Ozone configuration that will work out-of-the-box.

Revision as of 14:38, 16 May 2018

SWO

SWO is supported on the STM32H743I-EVAL.

Requirements

In order to make SWO working correctly, min. J-Link software V6.33a is required. Previous versions are not guaranteed to work correctly with SWO.

Sample projects

The following sample projects that demonstrate SWO on the STM32H743I-EVAL are available:

This example project does not require any extra settings by the user. The SWO stream can be viewed with e.g. JLinkSWOViewer which is included in the J-Link software and documentation package and is available for free.

  • IAR EWARM 8.22 sample project
  • Note: IAR does not handle the special setup needed for this particular target device automatically so SWO printf will only work when using Ozone. The example project contains a Ozone configuration that will work out-of-the-box.