STM32H743I-EVAL

From SEGGER Wiki
Revision as of 12:55, 6 August 2018 by Nino (talk | contribs) (Sample projects)
Jump to: navigation, search

SWO

SWO is supported on the STM32H743I-EVAL.

Requirements

In order to make SWO working correctly, min. J-Link software V6.33a is required. Previous versions are not guaranteed to work correctly with SWO. The following example project was created with Embedded Studio V3.40.

Sample projects

The following sample projects that demonstrate SWO on the STM32H743I-EVAL are available:

This example project does not require any extra settings by the user. The SWO stream can be viewed with e.g. JLinkSWOViewer which is included in the J-Link software and documentation package and is available for free. This project was created with Embedded Studio V3.40.

  • IAR EWARM 8.22 sample project
  • Note: IAR does not handle the special setup needed for this particular target device automatically so SWO printf will only work when using Ozone. The example project contains a Ozone configuration that will work out-of-the-box.