Difference between revisions of "STM8 Programming"

From SEGGER Wiki
Jump to: navigation, search
(How to program STM8 devices.)
 
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
  +
=== General ===
'''Universal Flash Loader Configurator''' or '''Universal Flash Loader''' or short '''UFL''' is the way to program many STM8 cores.
 
  +
'''Universal Flash Loader Configurator''', '''Universal Flash Loader''', '''UniversalFlasher.exe''' or short '''UFL''' is the way to program many STM8 devices.
  +
Flasher STM8 is a legacy product. The Flasher PRO supports STM8 devices in conjunction with the STM8 adapter and many other devices.
   
  +
Projects which were created for the Flasher STM8 are not supported by the Flasher Pro.
The old STM8 Flasher does not work any longer so we introduced the unified STM8 Adapter which works with all our Flashers.
 
  +
Please create a new project with the Universal Flash Loader in order to program your STM8 device.
   
  +
[[File:Universal_Flash_Loader.jpg|400px]][[File:STM8-Adapter.png|200px]]
J-Flash mostly supports ARM cores and not STM8 devices use the '''UFL''' instead to configure your project.
 
  +
  +
=== Wiring diagram of the STM8 Adapter: ===
  +
[[File:STM8-Adapter-Schematic.jpg|600px]]
  +
Please note that without the STM8 adapter you have to connect the SWIM line to TCK and via a 1k resistor to PIN17.

Latest revision as of 11:51, 14 October 2021

General

Universal Flash Loader Configurator, Universal Flash Loader, UniversalFlasher.exe or short UFL is the way to program many STM8 devices. Flasher STM8 is a legacy product. The Flasher PRO supports STM8 devices in conjunction with the STM8 adapter and many other devices.

Projects which were created for the Flasher STM8 are not supported by the Flasher Pro.
Please create a new project with the Universal Flash Loader in order to program your STM8 device.

Universal Flash Loader.jpgSTM8-Adapter.png

Wiring diagram of the STM8 Adapter:

STM8-Adapter-Schematic.jpg

Please note that without the STM8 adapter you have to connect the SWIM line to TCK and via a 1k resistor to PIN17.