Difference between revisions of "STM8 Programming"

From SEGGER Wiki
Jump to: navigation, search
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
  +
=== General ===
 
'''Universal Flash Loader Configurator''', '''Universal Flash Loader''', '''UniversalFlasher.exe''' or short '''UFL''' is the way to program many STM8 devices.
 
'''Universal Flash Loader Configurator''', '''Universal Flash Loader''', '''UniversalFlasher.exe''' or short '''UFL''' is the way to program many STM8 devices.
  +
Flasher STM8 is a legacy product. The Flasher PRO supports STM8 devices in conjunction with the STM8 adapter and many other devices.
 
Flasher STM8 is a legacy product, its successor is Flasher PRO with the STM8 Adapter.
 
   
 
Projects which were created for the Flasher STM8 are not supported by the Flasher Pro.
 
Projects which were created for the Flasher STM8 are not supported by the Flasher Pro.
Create a new project with the Universal Flash Loader to program your STM8 device.
+
Please create a new project with the Universal Flash Loader in order to program your STM8 device.
   
 
[[File:Universal_Flash_Loader.jpg|400px]][[File:STM8-Adapter.png|200px]]
 
[[File:Universal_Flash_Loader.jpg|400px]][[File:STM8-Adapter.png|200px]]
  +
  +
=== Wiring diagram of the STM8 Adapter: ===
  +
[[File:STM8-Adapter-Schematic.jpg|600px]]
  +
Please note that without the STM8 adapter you have to connect the SWIM line to TCK and via a 1k resistor to PIN17.

Latest revision as of 11:51, 14 October 2021

General

Universal Flash Loader Configurator, Universal Flash Loader, UniversalFlasher.exe or short UFL is the way to program many STM8 devices. Flasher STM8 is a legacy product. The Flasher PRO supports STM8 devices in conjunction with the STM8 adapter and many other devices.

Projects which were created for the Flasher STM8 are not supported by the Flasher Pro.
Please create a new project with the Universal Flash Loader in order to program your STM8 device.

Universal Flash Loader.jpgSTM8-Adapter.png

Wiring diagram of the STM8 Adapter:

STM8-Adapter-Schematic.jpg

Please note that without the STM8 adapter you have to connect the SWIM line to TCK and via a 1k resistor to PIN17.