Difference between revisions of "ST STM32U5"
(→Example Application) |
|||
Line 29: | Line 29: | ||
==Reset== |
==Reset== |
||
No special reset is required. |
No special reset is required. |
||
− | ==Evaluation Boards== |
||
− | *ST NUCLEO-MB1549-WS: https://wiki.segger.com/ST_NUCLEO-MB1549-WS |
||
==Example Application== |
==Example Application== |
||
+ | The following example project was created with the SEGGER Embedded Studio project wizard and should run out-of-the-box on any ST STM32U5xxxx device. It is a simple for loop incrementing the integer i. The application is linked into the internal flash.<br> |
||
− | *ST NUCLEO-MB1549-WS: https://wiki.segger.com/ST_NUCLEO-MB1549-WS#Example_Project |
||
+ | '''SETUP''' |
||
+ | *J-Link software: V6.99a |
||
+ | *Embedded Studio: V5.34 (or later) |
||
+ | *Hardware: Socket board with ST STM32U5 mounted |
||
+ | *Link: [[File:ST_STM32U5xxxx_TestProject_ES_V534.zip]] |
Revision as of 18:07, 11 March 2021
The ST STM32U5 series are 32-bit ultra low power microcontrollers based on the ARM Cortex-M33 processor.
Device family
The STM32U5 device family consists of two subfamilies: STM32U575xx and STM32U585xx.
STM32U575xx | STM32U585xx |
---|---|
STM32U575AI | STM32U585AI |
STM32U575CI | STM32U585CI |
STM32U575OI | STM32U585OI |
STM32U575QI | STM32U585QI |
STM32U575RI | STM32U585RI |
STM32U575VI | STM32U585VI |
STM32U575ZI | STM32U585ZI |
On-Chip Memory Regions
The internal flash consists of a single 2MB region start at address 0x08000000 and ending at 0x081FFFFF.
Reset
No special reset is required.
Example Application
The following example project was created with the SEGGER Embedded Studio project wizard and should run out-of-the-box on any ST STM32U5xxxx device. It is a simple for loop incrementing the integer i. The application is linked into the internal flash.
SETUP
- J-Link software: V6.99a
- Embedded Studio: V5.34 (or later)
- Hardware: Socket board with ST STM32U5 mounted
- Link: File:ST STM32U5xxxx TestProject ES V534.zip