Difference between revisions of "SparkFun MicroMod RP2040"
(Created page with " thumb | right | 300 px | SparkFun MicroMod RP2040 with carrier board (RP2040) The SparkFun MicroMod RP2040 is a [[Raspberry Pi RP2040]...") |
|||
Line 15: | Line 15: | ||
The SparkFun MicroMod RP2040 can be placed on a SparkFun MicroMod ATP Carrier Board. |
The SparkFun MicroMod RP2040 can be placed on a SparkFun MicroMod ATP Carrier Board. |
||
This carrier board comes with a Cortex-M 9-pin debug header |
This carrier board comes with a Cortex-M 9-pin debug header |
||
− | <br>'''Note:''' For a all J-Link models, the [https://www.segger.com/products/debug-probes/j-link/accessories/adapters/9-pin-cortex-m-adapter/ SEGGER Cortex-M 9-Pin Adapter] can be used for the SparkFun MicroMod ATP Carrier Board (except for J-Link EDU mini, which comes with a Cortex-M 9-Pin debug |
+ | <br>'''Note:''' For a all J-Link models, the [https://www.segger.com/products/debug-probes/j-link/accessories/adapters/9-pin-cortex-m-adapter/ SEGGER Cortex-M 9-Pin Adapter] can be used for the SparkFun MicroMod ATP Carrier Board (except for J-Link EDU mini, which comes with a Cortex-M 9-Pin debug interface itself). |
==Example Projects== |
==Example Projects== |
||
To run the following example projects the following prerequisites need to be met: |
To run the following example projects the following prerequisites need to be met: |
||
* [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack J-Link software] V7.00b or later |
* [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack J-Link software] V7.00b or later |
||
− | * J-Link HW revision 11 or later (J-Link |
+ | * J-Link HW revision 11 or later (J-Link EDU Mini and J-Trace Pro V1 or later also supported) |
* [https://www.segger.com/products/development-tools/embedded-studio/ SEGGER Embedded Studio] V5.42a or later |
* [https://www.segger.com/products/development-tools/embedded-studio/ SEGGER Embedded Studio] V5.42a or later |
||
Revision as of 16:45, 23 April 2021
The SparkFun MicroMod RP2040 is a Raspberry Pi RP2040 evaluation board.
Features (selection)
- RP2040 MCU
- 16MB on board QSPI flash
- USB-C
- On board LED
- 30 I/O pins
- Cortex-M 9-Pin external debug connector
For further information please refer to the SparkFun MicroMod RP2040 web page.
Setting up with J-Link
The SparkFun MicroMod RP2040 can be placed on a SparkFun MicroMod ATP Carrier Board.
This carrier board comes with a Cortex-M 9-pin debug header
Note: For a all J-Link models, the SEGGER Cortex-M 9-Pin Adapter can be used for the SparkFun MicroMod ATP Carrier Board (except for J-Link EDU mini, which comes with a Cortex-M 9-Pin debug interface itself).
Example Projects
To run the following example projects the following prerequisites need to be met:
- J-Link software V7.00b or later
- J-Link HW revision 11 or later (J-Link EDU Mini and J-Trace Pro V1 or later also supported)
- SEGGER Embedded Studio V5.42a or later