SparkFun MicroMod RP2040

SparkFun MicroMod RP2040 with carrier board (RP2040)

The SparkFun MicroMod RP2040 is a Raspberry Pi RP2040 evaluation board.

Features (selection)

• RP2040 MCU
• 16MB on board QSPI flash
• USB-C
• On board LED
• 30 I/O pins
• Cortex-M 9-Pin external debug connector

For further information please refer to the SparkFun MicroMod RP2040 web page.

Setting up with J-Link

The SparkFun MicroMod RP2040 can be placed on a SparkFun MicroMod ATP Carrier Board. This carrier board comes with a Cortex-M 9-pin debug header
Note: For a all J-Link models, the SEGGER Cortex-M 9-Pin Adapter can be used for the SparkFun MicroMod ATP Carrier Board (except for J-Link EDU mini, which comes with a Cortex-M 9-Pin debug inteface itself).

Example Projects

To run the following example projects the following prerequisites need to be met:

• J-Link software V7.00b or later
• J-Link HW revision 11 or later (J-Link Edu Mini and J-Trace Pro V1 or later also supported)
• SEGGER Embedded Studio V5.42a or later

Samples

• QSPI blinky