The Syntacore SCR1 is a RISC-V based device which is supported by J-Link
Please note that a current J-Link model is needed for RISC-V support: Overview
J-Link supports the Syntacore SCR1 since the following J-Link software versions:
The following example project requires SEGGER Embedded Studio for RISC-V. It downloads a simple Cnt++ loop into the 64 TCM @ 0xF0000000
Note: Please make sure to install SEGGER Embedded Studio first and after that the J-Link software package. At the end of the software package installation, you will be asked if you want to update SEGGER Embedded Studio to the latest J-Link SW. Please perform the update.
Available eval boards
The following eval boards are available: