Difference between revisions of "System Workbench"

From SEGGER Wiki
Jump to: navigation, search
(Thread-Aware Example)
(4 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
System Workbench is an Eclipse-based IDE developed by the AC6 in partnership with ST.
 
System Workbench is an Eclipse-based IDE developed by the AC6 in partnership with ST.
 
=Setup for J-Link Debug=
 
=Setup for J-Link Debug=
The setup for debugging your target with J-Link probes is exactly the same as for an Eclipse IDE project. For further information on how to setup your debugging environment please see [https://wiki.segger.com/Eclipse|Eclipse] or [https://www.segger.com/products/debug-probes/j-link/technology/ides/system-workbench-for-stm32/|System Workbench STM32 j-Link Setup].
+
The setup for debugging your target with J-Link probes is exactly the same as for an Eclipse IDE project. For further information on how to setup your debugging environment please see [https://wiki.segger.com/Eclipse|Eclipse| WikiSegger Eclipse Setup] or [https://www.segger.com/products/debug-probes/j-link/technology/ides/system-workbench-for-stm32/|System Workbench STM32 j-Link Setup].
  
 
=Thread-Aware Example=
 
=Thread-Aware Example=
In the below link you may find a Thread-aware example using SEGGER J-Link freeRTOS plugin under Eclipse. This example was generated with ST CubeMX and works out-of-the-box and you may use it as a starting point for your project.  
+
In the below link you may find a Thread-aware example using SEGGER J-Link freeRTOS plugin under Eclipse. This example was generated with ST CubeMX and works out-of-the-box and you may use it as a starting point for your project.
[File:STM32L475 ThreadAwareDebug.zip| Download Thread-Aware Example Link]
+
 
 +
[[Media:STM32L475 ThreadAwareDebug.zip | J-Link FreeRTOS Thread-Aware Example Link]]
 +
 
 +
If you already have a running project with freeRTOS or embOS and you wish to add Thread-Aware support you can simply add -rtos GDBServer/RTOSPlugin_FreeRTOS under Debug Configurations from J-Link  Debugger -> "other options".
 +
These Plugins can be found under any J-Link installation folder: GDBServer\RTOSPlugin_embOS.dll and GDBServer\RTOSPlugin_FreeRTOS.dll
 +
 
 +
[[File:RTOSPlugin Eclipse.png|1000px]]

Revision as of 11:56, 12 July 2019

System Workbench is an Eclipse-based IDE developed by the AC6 in partnership with ST.

Setup for J-Link Debug

The setup for debugging your target with J-Link probes is exactly the same as for an Eclipse IDE project. For further information on how to setup your debugging environment please see WikiSegger Eclipse Setup or Workbench STM32 j-Link Setup.

Thread-Aware Example

In the below link you may find a Thread-aware example using SEGGER J-Link freeRTOS plugin under Eclipse. This example was generated with ST CubeMX and works out-of-the-box and you may use it as a starting point for your project.

J-Link FreeRTOS Thread-Aware Example Link

If you already have a running project with freeRTOS or embOS and you wish to add Thread-Aware support you can simply add -rtos GDBServer/RTOSPlugin_FreeRTOS under Debug Configurations from J-Link Debugger -> "other options". These Plugins can be found under any J-Link installation folder: GDBServer\RTOSPlugin_embOS.dll and GDBServer\RTOSPlugin_FreeRTOS.dll

RTOSPlugin Eclipse.png