Difference between revisions of "System Workbench"

From SEGGER Wiki
Jump to: navigation, search
(Thread-Aware Example)
(Setup for J-Link Debug)
Line 2: Line 2:
 
System Workbench is an Eclipse-based IDE developed by the AC6 in partnership with ST.
 
System Workbench is an Eclipse-based IDE developed by the AC6 in partnership with ST.
 
=Setup for J-Link Debug=
 
=Setup for J-Link Debug=
The setup for debugging your target with J-Link probes is exactly the same as for an Eclipse IDE project. For further information on how to setup your debugging environment please see [https://wiki.segger.com/Eclipse|Eclipse] or [https://www.segger.com/products/debug-probes/j-link/technology/ides/system-workbench-for-stm32/|System Workbench STM32 j-Link Setup].
+
The setup for debugging your target with J-Link probes is exactly the same as for an Eclipse IDE project. For further information on how to setup your debugging environment please see [https://wiki.segger.com/Eclipse|Eclipse| WikiSegger Eclipse Setup] or [https://www.segger.com/products/debug-probes/j-link/technology/ides/system-workbench-for-stm32/|System Workbench STM32 j-Link Setup].
   
 
=Thread-Aware Example=
 
=Thread-Aware Example=

Revision as of 10:53, 12 July 2019

System Workbench is an Eclipse-based IDE developed by the AC6 in partnership with ST.

Setup for J-Link Debug

The setup for debugging your target with J-Link probes is exactly the same as for an Eclipse IDE project. For further information on how to setup your debugging environment please see WikiSegger Eclipse Setup or Workbench STM32 j-Link Setup.

Thread-Aware Example

In the below link you may find a Thread-aware example using SEGGER J-Link freeRTOS plugin under Eclipse. This example was generated with ST CubeMX and works out-of-the-box and you may use it as a starting point for your project. Download Thread-Aware Example Link

If you already have a running project with freeRTOS or embOS and you wish to add Thread-Aware support you can simply add -rtos GDBServer/RTOSPlugin_FreeRTOS under "other options"(see below). These Plugins can be found under J-Link installation folder: GDBServer\RTOSPlugin_embOS.dll and GDBServer\RTOSPlugin_FreeRTOS.dll

RTOSPlugin Eclipse.png