TI Code Composer Studio
Revision as of 10:11, 18 October 2017 by Erik (talk | contribs) (Erik moved page Using Ethernet in TI's Code Composer Studio (CCS) to TI Code Composer Studio)
Problem
In current versions of the TI Code Composer Studio (CCS), the host interface to the J-Link (USB / Ethernet) can not be specified in the project settings.
Work-around
Make sure that no J-Link is connected to the PC via USB. Now, when starting a debug session, the J-Link DLL noticed that no J-Link is connected and the Emulator selection dialog pops up, which allows to connect to a J-Link via Ethernet (TCP/IP):
Now, enter the desired connection method and confirm the dialog with Yes. If nothing specified, the J-Link DLL shows a list of all J-Links found via TCP/IP. Afterwards, CCS establishes a connection via TCP/IP to the selected J-Link.
Notes
- The work-around can be used with any J-Link with Ethernet interface.
- Currently, the work-around is available for Windows, only.
- Emulator selection dialog for MAC / Linux is already planned for future versions.
- Native host interface selection, using the GUI in CCS, is also planned for future versions.