Difference between revisions of "UM08001 J-Link / J-Trace User Guide"

From SEGGER Wiki
Jump to: navigation, search
(J-Link WiFi setup)
(J-Link WiFi setup)
Line 18: Line 18:
   
 
1) Using J-Link Commander:
 
1) Using J-Link Commander:
- Connect J-Link WiFi to your computer via USB
+
* Connect J-Link WiFi to your computer via USB
- Start J-Link Commander (JLink.exe)
+
* Start J-Link Commander (JLink.exe)
- Set up the SSID of your wireless network with the following command: SetWifi SSID <your_wifi_ssid>
+
* Set up the SSID of your wireless network with the following command: SetWifi SSID <your_wifi_ssid>
- Set up the password to your wireleass network with the following command: SetWifi Pass <your_wifi_password>
+
* Set up the password to your wireleass network with the following command: SetWifi Pass <your_wifi_password>
- After a few seconds, J-Link WiFi should be connected to your wireless network (the green WiFi LED should be always on).
+
* After a few seconds, J-Link WiFi should be connected to your wireless network (the green WiFi LED should be always on).
   
 
2) Using J-Link Configurator:
 
2) Using J-Link Configurator:
- Connect J-Link WiFi to your computer via USB
+
* Connect J-Link WiFi to your computer via USB
- Start J-Link Configurator (JLinkConfig.exe)
+
* Start J-Link Configurator (JLinkConfig.exe)
- Right-click on the J-Link WiFi in the list of connected J-Links and select 'Configure'
+
* Right-click on the J-Link WiFi in the list of connected J-Links and select 'Configure'
- In the WiFi configuration section, enter the SSID and the password of your wireless network
+
* In the WiFi configuration section, enter the SSID and the password of your wireless network
- Click OK
+
* Click OK
- Unplug and reconnect your J-Link WiFi
+
* Unplug and reconnect your J-Link WiFi
- Click OK
+
* Click OK
- After a few seconds, J-Link WiFi should be connected to your wireless network (the green WiFi LED should be always on).
+
* After a few seconds, J-Link WiFi should be connected to your wireless network (the green WiFi LED should be always on).
   
 
== J-Link WiFi in J-Link Configurator ==
 
== J-Link WiFi in J-Link Configurator ==

Revision as of 15:01, 8 November 2019

J-Link User Guide

J-Link software and documentation package

JRun

TBD

Command line options

TBD

Working with J-Link and J-Trace

J-Link WiFi setup

J-Link WiFi can be set up in multiple ways.

1) Using J-Link Commander:

  • Connect J-Link WiFi to your computer via USB
  • Start J-Link Commander (JLink.exe)
  • Set up the SSID of your wireless network with the following command: SetWifi SSID <your_wifi_ssid>
  • Set up the password to your wireleass network with the following command: SetWifi Pass <your_wifi_password>
  • After a few seconds, J-Link WiFi should be connected to your wireless network (the green WiFi LED should be always on).

2) Using J-Link Configurator:

  • Connect J-Link WiFi to your computer via USB
  • Start J-Link Configurator (JLinkConfig.exe)
  • Right-click on the J-Link WiFi in the list of connected J-Links and select 'Configure'
  • In the WiFi configuration section, enter the SSID and the password of your wireless network
  • Click OK
  • Unplug and reconnect your J-Link WiFi
  • Click OK
  • After a few seconds, J-Link WiFi should be connected to your wireless network (the green WiFi LED should be always on).

J-Link WiFi in J-Link Configurator

JLink WiFi will only be shown in the Configurator if connected via USB. This is because the Configurator uses UDP broadcast packets to find J-Links in the network. However, most routers have UDP broadcast and UDP multicast packets disabled for WiFi networks.