NXP i.MXRT600

QSPI support

The RT600 does not come with internal flash but with external flash connected to the FlexSPI bus, only. The external FlexSPI controller allows to connect several different flash types like QSPI, HyperFlash and Octaflash. Furthermore, the external flash can be connected to different pin / ports of the FlexSPI controller which makes a auto-detection kind of difficult thus a out-of-the-box solution which works for all setups is kind of impossible. For that reason, the J-Link software supports the evaluation board setup, only. Other setups may follow. If you are working with a different setup and looking for support for this setup, please get in touch with the J-Link team.

X-MIMXRT685-EVK Flash: MX25UM51345G FlexSPI: port B Pins: (see table below)

Signal Name | GPIO name | IO function ++++++++++++++++++++++++++++++++++++++++++++++++++++ QSPI_B_CS0 | PIO2_19 | FLEXSPI0B_SS0_N QSPI_B_SCK | PIO1_29 | FLEXSPI0B_SCLK QSPI_B_DATA0 | PIO1_11 | FLEXSPI0B_DATA0 QSPI_B_DATA1 | PIO1_12 | FLEXSPI0B_DATA1 QSPI_B_DATA2 | PIO1_13 | FLEXSPI0B_DATA2 QSPI_B_DATA3 | PIO1_14 | FLEXSPI0B_DATA3 QSPI_B_DATA4 | PIO2_17 | FLEXSPI0B_DATA4 QSPI_B_DATA5 | PIO2_18 | FLEXSPI0B_DATA5 QSPI_B_DATA6 | PIO2_22 | FLEXSPI0B_DATA6 QSPI_B_DATA7 | PIO2_23 | FLEXSPI0B_DATA7 nRESET_QSPI | PIO2_12 | PIO2_12