ncoder N4

From SEGGER Wiki
Revision as of 12:08, 16 May 2024 by Simon Buchholz (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The ncoder N4 device is a Syntacore SCR1/RISC-V based 32-bit microcontroller.

Target interface

The core supports cJTAG as a target interface. Due to known limitations with Syntacore SCR1, the maximum stable interface speed is ~1MHz.


Reset is performed through the RESET pin, so it has to be connected for the reset to work.

Internal Flash

J-Link supports the internal flash located at 0x000C0000 with a size of 32 KB.

Due to the interface speed limitation, programming speed is limited to ~12 KB/s.

Evaluation Boards

ncoder N4 board

Example Application

ncoder N4 board example application