Difference between revisions of "Silicon Labs RS9116X-DB-EVK1"
(Created page with "__TOC__ This article describes specifics for the Silicon Labs RS9116X-DB-EVK1 evaluation board. It can be used to test & verify Silicon Labs RS9116...") |
|||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
Latest revision as of 15:20, 8 May 2024
This article describes specifics for the Silicon Labs RS9116X-DB-EVK1 evaluation board. It can be used to test & verify Silicon Labs RS9116 support.
Minimum requirements
- J-Link software V6.95b or later
Preparing for J-Link
- Connect the J-Link to the JTAG/TRACE header (J7)
- Power the board via external USB power supply (J23)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows: