Difference between revisions of "STM3241G-EVAL"
(Created page with "==Jumper settings to enable trace pins== In order to enable the trace pins on this particular board jumpers JP1 and JP2 need to be in a fixed position. * JP1: Connect PE4 to...") |
|||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
==Jumper settings to enable trace pins== |
==Jumper settings to enable trace pins== |
||
In order to enable the trace pins on this particular board jumpers JP1 and JP2 need to be in a fixed position. |
In order to enable the trace pins on this particular board jumpers JP1 and JP2 need to be in a fixed position. |
Latest revision as of 11:32, 15 May 2024
Jumper settings to enable trace pins
In order to enable the trace pins on this particular board jumpers JP1 and JP2 need to be in a fixed position.
- JP1: Connect PE4 to trace connector CN13 as TRACE_D1 by setting JP1 on position 1-2
- JP2: Connect PE3 to trace connector CN13 as TRACE_D0 by setting JP2 to position 1-2