Difference between revisions of "GigaDevice GD32F5"
(→Device Specific Handling) |
|||
Line 27: | Line 27: | ||
| Option Bytes (Bank 1) || 0x1FFEC000 || 16 B || style="text-align:center;"| {{NO}} |
| Option Bytes (Bank 1) || 0x1FFEC000 || 16 B || style="text-align:center;"| {{NO}} |
||
|} |
|} |
||
+ | |||
+ | ==ECC RAM== |
||
+ | In order to prevent errors when reading first time, the DLL initializes the first 256KB of RAM |
||
+ | starting at 0x2000 0000. |
||
==Watchdog Handling== |
==Watchdog Handling== |
Revision as of 09:06, 25 June 2024
The GigaDevice GD32F5 series are 32-bit general-purpose microcontrollers based on the ARM Cortex-M33 processor.
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Main flash | 0x08000000 | Up to 3072 KB | |
OTP Block 1 (data) | 0x1FF00000 | 8 KB | |
OTP Block 2 (data) | 0x1FF20000 | 512 B | |
OTP Block 1 (lock) | 0x1FF20200 | 16 B | |
OTP Block 2 (lock) | 0x1FF20210 | 16 B | |
OTP0 Block (data) | 0x1FFF7800 | 64 B | |
OTP0 Block (lock) | 0x1FFF7840 | 16 B | |
Option Bytes (Bank 0) | 0x1FFFC000 | 16 B | |
Option Bytes (Bank 1) | 0x1FFEC000 | 16 B |
ECC RAM
In order to prevent errors when reading first time, the DLL initializes the first 256KB of RAM starting at 0x2000 0000.
Watchdog Handling
- The device does have 2 watchdogs, FWDGT and WWDGT.
- The WWDGT watchdog is fed during flash programming.
Device Specific Handling
Connect
- On Connect, protection level is checked. For further information regarding this, please click here.
Reset
- The device uses normal Cortex-M reset, no special handling necessary, like described here.
Evaluation Boards
- GigaDevice GD32403V-START
- GigaDevice GD32407H-START
- GigaDevice GD32407V-START
- GigaDevice GD32450I-EVAL
- GigaDevice GD32450Z-EVAL
- GigaDevice GD32F427V-START
- GigaDevice GD32F470Z-EVAL