GigaDevice GD32F527I-EVAL

This article describes specifics for the GigaDevice GD32F527I-EVAL evaluation board.

Preparing for J-Link

• Connect the J-Link to the JTAG header (JP1)
• Power the board via USB (GD-LINK CN100)
• Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32F527I-EVAL.
It is a simple Hello World sample linked into the internal flash.

SETUP

• J-Link software: V7.96p
• Embedded Studio: V7.20
• Hardware: GigaDevice GD32F527I-EVAL
• Link: File:GigaDevice GD32F527IST7 TestProject ES 7V20.zip