Difference between revisions of "TI LP-EM-CC2340R5"
(Created page with "__TOC__ This article describes specifics for the TI LP-EM-CC2340R5 evaluation board.<br> '''[PICTURE OF BOARD]''' 450px == Preparing for J-Lin...") |
(No difference)
|
Revision as of 16:29, 16 May 2023
Contents
This article describes specifics for the TI LP-EM-CC2340R5 evaluation board.
[PICTURE OF BOARD]
Preparing for J-Link
- Connect the J-Link to J4
- Power the board via 3.3V DC (3.3V connected 3V3; GND connected to GND)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
[PICTURE OF CONNECT]
Example Project
TBD
