Difference between revisions of "Microchip CuriosityPro PIC32CMLE00"
(Created page with "__TOC__ This article describes specifics for the Microchip Curiosity Pro PIC32CMLE00 evaluation board.<br> 450px == Pre...") |
(No difference)
|
Revision as of 09:52, 14 June 2023
This article describes specifics for the Microchip Curiosity Pro PIC32CMLE00 evaluation board.
Preparing for J-Link
- Connect the J-Link to J400.
- Power the board via J200.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Microchip Curiosity Pro PIC32CMLS00.
It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V7.86c
- Embedded Studio: V6,34
- Hardware: Microchip Curiosity Pro PIC32CMLS00
- Link: File:Microchip CuriosityPro PIC32CMLE00 TestProject ES 6V34.zip
