Difference between revisions of "ST STM32WBA"
(→Watchdog Handling) |
|||
Line 17: | Line 17: | ||
==Watchdog Handling== |
==Watchdog Handling== |
||
− | *The device |
+ | *The device has 2 watchdogs, IWDG & WWDG. |
+ | *Both are fed during flash programming. |
||
− | *The device has a watchdog [WATCHDOGNAME]. |
||
− | *The watchdog is fed during flash programming. |
||
− | *If the watchdog is enabled, it is turned off during flash programming and turned back on afterwards. |
||
− | |||
==Device Specific Handling== |
==Device Specific Handling== |
Revision as of 10:36, 4 July 2023
The ST STM32WBA series are Cortex-M33 based wireless MCUs for Bluetooth® Low Energy 5.3-enabled applications.
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Internal flash NS | 0x08000000 | Up to 1MB | |
Internal flash S | 0x0C000000 | Up to 1MB | |
User Option | 0x40022040 | 48B |
Watchdog Handling
- The device has 2 watchdogs, IWDG & WWDG.
- Both are fed during flash programming.
Device Specific Handling
Connect
Reset
- The devices uses normal Cortex-M reset, no special handling necessary, like described here.
- The devices uses Cortex-M Core reset, no special handling necessary, like described here.
- The devices uses Cortex-M Rest Pin, no special handling necessary, like described here.
- The device uses custom reset:.....
Security
Evaluation Boards
- [SiliconVendor] [EvalBoardName] evaluation board: http://techwiki.segger.local/WikiTemplateEvalBoard
Example Application
- [SiliconVendor] [EvalBoardName] evaluation board: http://techwiki.segger.local/WikiTemplateEvalBoard#Example_Project