Difference between revisions of "ST STM32WBA"
(→Watchdog Handling) |
|||
Line 15: | Line 15: | ||
|} |
|} |
||
+ | == Option bytes flash == |
||
+ | Option byte programming is directly supported by J-Link. |
||
+ | Alternatively, option bytes can be programmed via the Flash registers as shown in the [[ST_STM32 | ST STM32 main article]]. |
||
==Watchdog Handling== |
==Watchdog Handling== |
Revision as of 10:37, 4 July 2023
The ST STM32WBA series are Cortex-M33 based wireless MCUs for Bluetooth® Low Energy 5.3-enabled applications.
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Internal flash NS | 0x08000000 | Up to 1MB | |
Internal flash S | 0x0C000000 | Up to 1MB | |
User Option | 0x40022040 | 48B |
Option bytes flash
Option byte programming is directly supported by J-Link. Alternatively, option bytes can be programmed via the Flash registers as shown in the ST STM32 main article.
Watchdog Handling
- The device has 2 watchdogs, IWDG & WWDG.
- Both are fed during flash programming.
Device Specific Handling
Connect
Reset
- The devices uses normal Cortex-M reset, no special handling necessary, like described here.
- The devices uses Cortex-M Core reset, no special handling necessary, like described here.
- The devices uses Cortex-M Rest Pin, no special handling necessary, like described here.
- The device uses custom reset:.....
Security
Evaluation Boards
- [SiliconVendor] [EvalBoardName] evaluation board: http://techwiki.segger.local/WikiTemplateEvalBoard
Example Application
- [SiliconVendor] [EvalBoardName] evaluation board: http://techwiki.segger.local/WikiTemplateEvalBoard#Example_Project