Difference between revisions of "ST STM32WBA"
(6 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
+ | [[Category:Device families]] |
||
− | The '''ST STM32WBA''' series are Cortex-M33 based wireless MCUs for Bluetooth® Low Energy 5.3-enabled applications. |
||
+ | The '''ST STM32WBA''' series are Cortex-M33® based wireless MCUs for Bluetooth® Low Energy 5.3-enabled applications. |
||
__TOC__ |
__TOC__ |
||
Line 11: | Line 12: | ||
|- |
|- |
||
| Internal flash S || 0x0C000000 || Up to 1MB || style="text-align:center;"| {{YES}} |
| Internal flash S || 0x0C000000 || Up to 1MB || style="text-align:center;"| {{YES}} |
||
− | |- |
||
− | | User Option || 0x40022040|| 48B || style="text-align:center;"| {{YES}} |
||
|} |
|} |
||
== Option bytes flash == |
== Option bytes flash == |
||
− | Option byte programming is directly supported by J-Link. |
+ | Option byte programming is not directly supported by J-Link. |
Alternatively, option bytes can be programmed via the Flash registers as shown in the [[ST_STM32 | ST STM32 main article]]. |
Alternatively, option bytes can be programmed via the Flash registers as shown in the [[ST_STM32 | ST STM32 main article]]. |
||
Line 29: | Line 28: | ||
==Evaluation Boards== |
==Evaluation Boards== |
||
*ST NUCLEO-WBA52CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA52CG |
*ST NUCLEO-WBA52CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA52CG |
||
+ | *ST NUCLEO-WBA55CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA55CG |
||
==Example Application== |
==Example Application== |
||
− | *ST NUCLEO- |
+ | *ST NUCLEO-WBA55CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA55CG#Example_Project |
Latest revision as of 11:23, 15 May 2024
The ST STM32WBA series are Cortex-M33® based wireless MCUs for Bluetooth® Low Energy 5.3-enabled applications.
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Internal flash NS | 0x08000000 | Up to 1MB | |
Internal flash S | 0x0C000000 | Up to 1MB |
Option bytes flash
Option byte programming is not directly supported by J-Link. Alternatively, option bytes can be programmed via the Flash registers as shown in the ST STM32 main article.
Watchdog Handling
- The device has 2 watchdogs, IWDG & WWDG.
- Both are fed during flash programming.
Device Specific Handling
Reset
- The devices uses normal Cortex-M reset, no special handling necessary, like described here.
Evaluation Boards
- ST NUCLEO-WBA52CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA52CG
- ST NUCLEO-WBA55CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA55CG
Example Application
- ST NUCLEO-WBA55CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA55CG#Example_Project