Difference between revisions of "Renesas RA0E1"
(→Internal Flash) |
|||
Line 1: | Line 1: | ||
+ | [[Category:Device families]] |
||
The '''Renesas RA0E1''' are Cortex-M23 based microcontrollers. |
The '''Renesas RA0E1''' are Cortex-M23 based microcontrollers. |
||
__TOC__ |
__TOC__ |
Latest revision as of 13:26, 15 May 2024
The Renesas RA0E1 are Cortex-M23 based microcontrollers.
Contents
Internal Flash
Flash Bank | Base address | Size | J-Link Support | Loaders |
---|---|---|---|---|
Program flash | 0x00000000 | Up to 64 KB |
| |
Data flash | 0x40100000 | 1 KB |
|
NOTE:The device has an Independent Watchdog Timer (IWDT) which is fed during flash programming.
Device Specific Handling
Connect
- Authentication via IDCODE is supported
- Wake-up CPU from low-power mode is supported
- Connect under reset is supported
Reset
- The devices uses normal Cortex-M reset, no special handling necessary, like described here.
Disconnect
On disconnect, the J-Link restores device specific settings which are required to support low power mode debugging but may result in an increased power consumption if not disabled.
Evaluation Boards
N/A
Example Application
N/A