Difference between revisions of "Renesas EK-RA6M2"

From SEGGER Wiki
Jump to: navigation, search
(Created page with "__TOC__ This article describes specifics for the Renesas EK-RA6M2 evaluation board.<br> 450px == Preparing for J-Link == *Co...")
 
(Preparing for J-Link)
 
Line 6: Line 6:
   
 
== Preparing for J-Link ==
 
== Preparing for J-Link ==
*Connect the J-Link to the JTAG header (J13)
+
*Connect the J-Link to the JTAG header (J10)
*Power the board via J10.
+
*Power the board via J11.
 
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
 
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
 
[[File:Renesas_R7FA6M2AF_EK-RA6M2_connect.png|400px]]
 
[[File:Renesas_R7FA6M2AF_EK-RA6M2_connect.png|400px]]
  +
 
== Example Project==
 
== Example Project==
 
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Renesas EK-RA6M2.<br>It is a simple Hello World sample linked into the internal flash.<br>
 
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Renesas EK-RA6M2.<br>It is a simple Hello World sample linked into the internal flash.<br>

Latest revision as of 15:38, 28 June 2024

This article describes specifics for the Renesas EK-RA6M2 evaluation board.
Renesas R7FA6M2AF EK-RA6M2 picture.jpg


Preparing for J-Link

  • Connect the J-Link to the JTAG header (J10)
  • Power the board via J11.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Renesas R7FA6M2AF EK-RA6M2 connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Renesas EK-RA6M2.
It is a simple Hello World sample linked into the internal flash.

SETUP