Difference between revisions of "Renesas RX66T"
Line 12: | Line 12: | ||
==User boot area== |
==User boot area== |
||
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is '''not''' suppored |
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is '''not''' suppored |
||
+ | |||
+ | =Supported debug interfaces= |
||
+ | The following debug interfaces are supported for the RX66T series: |
||
+ | * JTAG |
||
+ | * FINE |
Revision as of 16:37, 3 July 2019
This article describes device specifics of the Renesas RX66T series microcontrollers.
Requirements
- J-Link software V6.47e or later: Download
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files:
xxxxxxxxxxxxxxxxxxxxxxxx
Option-setting memory
Programming the option setting memory at addr. 0x12_0040 is supported.
User boot area
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is not suppored
Supported debug interfaces
The following debug interfaces are supported for the RX66T series:
- JTAG
- FINE