Difference between revisions of "J-Link RTT Client"
(Removed redirect to RTT#RTT Client) (Tag: Removed redirect) |
|||
Line 1: | Line 1: | ||
+ | [[Category:Software Tools]] |
||
The J-Link RTT Client is part of the [[J-Link Software and Documentation Pack | J-Link Software Pack]] for Windows, Linux and macOS and can be used for simple RTT use cases. |
The J-Link RTT Client is part of the [[J-Link Software and Documentation Pack | J-Link Software Pack]] for Windows, Linux and macOS and can be used for simple RTT use cases. |
||
Latest revision as of 13:19, 16 May 2024
The J-Link RTT Client is part of the J-Link Software Pack for Windows, Linux and macOS and can be used for simple RTT use cases.
It acts as a TELNET client which connects to the RTT TELNET channel, but automatically tries to reconnect to a J-Link connection when a debug session is closed.
Contents
Restricitons
- The J-Link RTT Client does not open a debug connection to the device via J-Link. As an active debug connection is required for RTT to work, the RTT Client can only be used in combination with a J-Link tool that establishes an active debug connection (e.g. J-Link Commander or J-Link GDB Server).
- J-Link RTT Client only supports communication via RTT up & down channel 0
Command line options
Command | Explanation |
---|---|
-? | Shows commandline options |
-LocalEcho | 1 = Enables - / 0 = Disables local echo |
-rtttelnetport <Port> | Sets the RTT telnet port to <Port> |