Difference between revisions of "MindMotion MM32A0"
(→Lock and Unlock Support) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:Device families]] |
||
__TOC__ |
__TOC__ |
||
The Mimdmotion MM32A0 series are 32-bit general-purpose microcontrollers based on the Arm® |
The Mimdmotion MM32A0 series are 32-bit general-purpose microcontrollers based on the Arm® |
||
| Line 49: | Line 50: | ||
! J-Flash:<br>Lock project |
! J-Flash:<br>Lock project |
||
|- |
|- |
||
| − | | |
+ | |MM32A0144C |
|scope="col" style="text-align:center" | {{YES}} |
|scope="col" style="text-align:center" | {{YES}} |
||
|[[:Media:MM32A0144Cxx_Lock.jlink|MM32A0144Cxx_Lock.jlink]] |
|[[:Media:MM32A0144Cxx_Lock.jlink|MM32A0144Cxx_Lock.jlink]] |
||
Latest revision as of 15:10, 15 May 2024
Contents
The Mimdmotion MM32A0 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M0 processor.
Device Family
| Device Family | Flash Size | RAM Size |
|---|---|---|
| MM32A0144 | 64KB | 4KB |
Supported Flash Banks
Internal Flash
| Device Family | StartAddr | Size | J-Link Support |
|---|---|---|---|
| MM32A0144 | 0x08000000 | 64KB | Yes |
Option Byte
| Device Family | StartAddr | Size | J-Link Support |
|---|---|---|---|
| MM32A0144 | 0x1FFFF800 | 16B | Yes |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82e or later
Evaluation Boards
- MindMotion Mini-A0144 evaluation board: https://wiki.segger.com/MindMotion_Mini-A0144
Example Application
- MindMotion Mini-A0144 evaluation board: https://wiki.segger.com/MindMotion_Mini-A0144#Example_Project
Lock and Unlock Support
| Device | J-Link Commander and J-Flash: native Unlock support |
J-Link Commander: Lock via command file |
J-Flash[1]: native lock support |
J-Flash: Lock project |
|---|---|---|---|---|
| MM32A0144C | 
|
MM32A0144Cxx_Lock.jlink | 
|
MM32A0144Cxx_Lock.jflash |
- ↑ For further information regarding native support in J-Flash and why native support is no longer implemented for new devices, please refer to this article: MCU_Security_Options
