Difference between revisions of "Infineon PMG1 S3"
(Created page with "EZ-PD PMG3 is a family of high-voltage USB PD MCUs with Arm® Cortex®-M0/Cortex-M0+ CPU. The PMG1 family of controllers includes different MCUs with integrated USB PD control...") |
(Replaced content with "Page moved here") (Tag: Replaced) |
||
| Line 1: | Line 1: | ||
| + | Page moved [[Infineon_PMG1| here]] |
||
| − | EZ-PD PMG3 is a family of high-voltage USB PD MCUs with Arm® Cortex®-M0/Cortex-M0+ CPU. The PMG1 family of controllers includes different MCUs with integrated USB PD controller, analog, and digital peripherals. You can choose the controller based on the design requirement. PMG3 is targeted at embedded systems that provide or consume power to or from a high-voltage USB-C PD port and leverage the MCU to provide additional control capability. |
||
| − | |||
| − | == Flash memory layout == |
||
| − | |||
| − | The PMG1-S3 / CYPM1311 series devices have 256KB internal flash. The flashes consists of one big sector. |
||
| − | |||
| − | {| class="wikitable" |
||
| − | |- |
||
| − | ! Flash !! Start address !! End address !! Sector size !! Sector count !! Total size |
||
| − | |- |
||
| − | | internal flash || 0x00000000 || 0x0003FFFF || 256 KB || 1 || 256 KB |
||
| − | |} |
||
| − | |||
| − | =Connection behavior= |
||
| − | The connect sequence of PMG1-S3 devices is very time critical and is performed from the J-Link's side directly. |
||
| − | |||
| − | A PMG1-S3 device with reconfigured SWD pins runs automatically the acquire sequence to get control of the SWD pins for debugging back. |
||
Revision as of 09:47, 14 May 2024
Page moved here
