Difference between revisions of "MindMotion Mini-L0020"
(Created page with "__TOC__ This article describes specifics for the MindMotion Mini-L0020 evaluation board.<br> '''[PICTURE OF BOARD]''' File:MindMotion_Mini-F0040_MM32F0040B1T_board.jpg|450p...") |
|||
Line 3: | Line 3: | ||
This article describes specifics for the MindMotion Mini-L0020 evaluation board.<br> |
This article describes specifics for the MindMotion Mini-L0020 evaluation board.<br> |
||
'''[PICTURE OF BOARD]''' |
'''[PICTURE OF BOARD]''' |
||
− | [[File:MindMotion_Mini- |
+ | [[File:MindMotion_Mini-L0020_MM32L0020B1T_board.jpg|450px]] |
== Preparing for J-Link == |
== Preparing for J-Link == |
||
Line 9: | Line 9: | ||
*Power the board via CN1. |
*Power the board via CN1. |
||
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
||
− | [[File:MindMotion_Mini- |
+ | [[File:MindMotion_Mini-L0020_MM32L0020B1T_connect.png|400px]] |
== Example Project== |
== Example Project== |
||
Line 17: | Line 17: | ||
*Embedded Studio: V6.34 |
*Embedded Studio: V6.34 |
||
*Hardware: MindMotion Mini-L0020 |
*Hardware: MindMotion Mini-L0020 |
||
− | *Link: [[File:MindMotion_Mini- |
+ | *Link: [[File:MindMotion_Mini-L0020_MM32L0020B1T_TestProject_ES_6V34.zip]] |
Revision as of 11:09, 27 March 2023
This article describes specifics for the MindMotion Mini-L0020 evaluation board.
[PICTURE OF BOARD]
450px
Preparing for J-Link
- Connect the J-Link to CN2.
- Power the board via CN1.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion Mini-L0020 .
It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V7.86f
- Embedded Studio: V6.34
- Hardware: MindMotion Mini-L0020
- Link: File:MindMotion Mini-L0020 MM32L0020B1T TestProject ES 6V34.zip