Difference between revisions of "STM32L4R9 Discovery"
Arne.kulinna (talk | contribs) |
|||
Line 13: | Line 13: | ||
! Alternate function !! Port / Pin |
! Alternate function !! Port / Pin |
||
|- |
|- |
||
− | | QSPI_CLK || |
+ | | QSPI_CLK || PI6 |
|- |
|- |
||
− | | QSPI_CS || |
+ | | QSPI_CS || PG12 |
|- |
|- |
||
| QSPI_D0 || PI11 |
| QSPI_D0 || PI11 |
Revision as of 16:01, 27 October 2023
QSPI Flash Programming Support
Before continuing with this article, please read the generic article about QSPI flash programming support on STM32L4 devices (STM32L4Pxxx / STM32L4Qxxx / STM32L4Rxxx / STM32L4Sxxx (Q)SPI support).
Example implementation
As described in the generic article, the reference flash algorithm is based on our internal SPIFI Lib that is part of the JLinkARM.dll. For adaption to other pin configs an openflashloader will be provided. For further information regarding the Open Flashloader and how to use the JLinkDevices.xml file, please refer to the Openflashloader Wiki article (Open Flashloader).
Quad-SPI Interface Pins
The ST STM32L4R9 Discovery uses the following port pins to interface the (Q)SPI flash.
Alternate function | Port / Pin |
---|---|
QSPI_CLK | PI6 |
QSPI_CS | PG12 |
QSPI_D0 | PI11 |
QSPI_D1 | PI10 |
QSPI_D2 | PI9 |
QSPI_D3 | PH8 |