Difference between revisions of "Renesas RZ/G2L"
(→Example Application) |
(→Cortex-M33) |
||
Line 3: | Line 3: | ||
==Cores== |
==Cores== |
||
===Cortex-M33=== |
===Cortex-M33=== |
||
− | By default, the Cortex-M33 is not enabled / held in reset. The J-Link software executes a device specific initialization sequence which enables the Cortex-M33 thus |
+ | By default, the Cortex-M33 is not enabled / held in reset. The J-Link software executes a device specific initialization sequence which enables the Cortex-M33 thus debugging via Cortex-M33 works out-of-the-box. |
+ | |||
===Cortex-A55=== |
===Cortex-A55=== |
||
Not supported yet. |
Not supported yet. |
Revision as of 11:39, 31 May 2021
The Renesas RZ/G2L microcontroller features a Cortex-A55 (single or dual) as main processors and a Cortex-M33 as co-processor.
Cores
Cortex-M33
By default, the Cortex-M33 is not enabled / held in reset. The J-Link software executes a device specific initialization sequence which enables the Cortex-M33 thus debugging via Cortex-M33 works out-of-the-box.
Cortex-A55
Not supported yet.
Evaluation Boards
- Renesas RZG2L SWARC EVK: https://wiki.segger.com/NXP_RZG2L_SWARC_EVK
Example Application
- Renesas RZG2L SWARC EVK: https://wiki.segger.com/NXP_RZG2L_SWARC_EVK#Example_Project