Difference between revisions of "RZ/G1E Starter Kit"
(Created page with "The RZ/G1E Starter Kit board's JTAG connector (CN1) is initially configured for JTAG Boundary SCAN. In order to connect to the CPU's debug port, at first the board needs to b...") |
|||
| Line 1: | Line 1: | ||
| + | [[Category:Evalboards]] |
||
The RZ/G1E Starter Kit board's JTAG connector (CN1) is initially configured for JTAG Boundary SCAN. |
The RZ/G1E Starter Kit board's JTAG connector (CN1) is initially configured for JTAG Boundary SCAN. |
||
Latest revision as of 13:33, 15 May 2024
The RZ/G1E Starter Kit board's JTAG connector (CN1) is initially configured for JTAG Boundary SCAN.
In order to connect to the CPU's debug port, at first the board needs to be manually reconfigured. This can be done by switching SW7/1 (MD21) to OFF (logic 1).
