Difference between revisions of "GigaDevice GD32350R-EVAL"
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
Latest revision as of 14:27, 15 May 2024
This article describes specifics for the GigaDevice GD32350R-EVAL evaluation board.
Preparing for J-Link
- Connect the J-Link to the JTAG header (JP3)
- Power the board via CN1.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32350R-EVAL.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V8.10a
- Hardware: GigaDevice GD32350R-EVAL
- Link: File:GigaDevice GD32F350RB TestProject ES V810a.zip