Difference between revisions of "MindMotion MB-101-Mini-G5333-OB"

From SEGGER Wiki
Jump to: navigation, search
(Created page with "__TOC__ This article describes specifics for the Mindmotion Mini-G5333-OB evaluation board. 450px == Minimum r...")
 
 
Line 1: Line 1:
  +
[[Category:Evalboards]]
 
__TOC__
  
__TOC__
   

Latest revision as of 15:12, 15 May 2024

This article describes specifics for the Mindmotion Mini-G5333-OB evaluation board.

450px

Minimum requirements

  • J-Link software V7.92e or later

Preparing for J-Link

  • Connect the J-Link to the SWD header (P2)
  • Power the board via USB-C (P4)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

MindMotion MB-101-Mini-G5333 MM32G5333D4QV connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion Mini-G5333-OB.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=MindMotion_MB-101-Mini-G5333-OB&oldid=19613"