Difference between revisions of "SAM E53/54 Xplained Pro"
(Created page with "'''Chip erase timeout with Atmel Studio''' When the Atmel SAM E53/54 Xplained Pro board gets powered through Target USB port, it can happen that Chip erase executed within At...") |
|||
| Line 1: | Line 1: | ||
| + | [[Category:Device families]] |
||
'''Chip erase timeout with Atmel Studio''' |
'''Chip erase timeout with Atmel Studio''' |
||
Latest revision as of 12:14, 16 May 2024
Chip erase timeout with Atmel Studio
When the Atmel SAM E53/54 Xplained Pro board gets powered through Target USB port, it can happen that Chip erase executed within AtmelStudio times out.
To fix this behavior it is necessary to power the board through the Debug USB port instead of the Target USB port. This behavior and the workaround have been confirmed by Microchip.
