Difference between revisions of "GigaDevice GD32E235C-EVAL"
(Created page with "Category:Evalboards __TOC__ This article describes specifics for the GigaDevice GD32E235C-EVAL evaluation board.<br> 450px...") |
|||
Line 4: | Line 4: | ||
This article describes specifics for the GigaDevice GD32E235C-EVAL evaluation board.<br> |
This article describes specifics for the GigaDevice GD32E235C-EVAL evaluation board.<br> |
||
− | [[File: |
+ | [[File:GigaDevice_GD32E235C-EVAL_board.jpg|450px]] |
== Preparing for J-Link == |
== Preparing for J-Link == |
||
Line 12: | Line 12: | ||
! J-Link Pin || Connector !! Pin || Name |
! J-Link Pin || Connector !! Pin || Name |
||
|- |
|- |
||
− | | VTref || |
+ | | VTref || JP1 || 1 || +3V3 |
|- |
|- |
||
− | | GND || |
+ | | GND || JP1 || 4 || GND |
|- |
|- |
||
− | | TMS/SWDIO || |
+ | | TMS/SWDIO || JP1 || 2 || IO |
|- |
|- |
||
− | | TCK/SWCLK || |
+ | | TCK/SWCLK || JP1 || 3 || CLK |
|} |
|} |
||
− | *Power the board via |
+ | *Power the board via CN100. |
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
||
− | [[File: |
+ | [[File:GigaDevice_GD32E235C-EVAL_GD32E235RBT6_connect.png|400px]] |
== Example Project== |
== Example Project== |
Revision as of 14:01, 13 June 2024
This article describes specifics for the GigaDevice GD32E235C-EVAL evaluation board.
Preparing for J-Link
- Connect the J-Link to this pins:
J-Link Pin | Connector | Pin | Name |
---|---|---|---|
VTref | JP1 | 1 | +3V3 |
GND | JP1 | 4 | GND |
TMS/SWDIO | JP1 | 2 | IO |
TCK/SWCLK | JP1 | 3 | CLK |
- Power the board via CN100.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32E235C-EVAL.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V7.20
- Hardware: GigaDevice GD32E235C-EVAL
- Link: File:GigaDevice GD32L235R. TestProject ES 7V20.zip