Difference between revisions of "LPC845"
(→MTB Trace) |
(→MTB Trace) |
||
Line 5: | Line 5: | ||
J-Link software V6.46 or later is required to use MTB on this device series. |
J-Link software V6.46 or later is required to use MTB on this device series. |
||
− | A sample project that demonstrates MTB backtrace via Ozone on this device can be found here: [https://wiki.segger.com/Tracing_on_NXP_LPC845#MTB_trace] |
+ | A sample project that demonstrates MTB backtrace via Ozone on this device can be found here: [https://wiki.segger.com/Tracing_on_NXP_LPC845#MTB_trace Trace Example] |
Revision as of 14:49, 29 April 2019
Contents
MTB Trace
For the LPC84x series, MTB support was implemented by NXP in a non-standard way so that various things like CoreSight auto-detection of MTB and its buffer are not possible. The J-Link software worksaround this and still gives the user a out-of-the-box experience when using MTB trace on this device. J-Link software V6.46 or later is required to use MTB on this device series.
A sample project that demonstrates MTB backtrace via Ozone on this device can be found here: Trace Example