Difference between revisions of "Renesas RX72T"
(Created page with "This article describes device specifics of the Renesas RX72T series microcontrollers. =Requirements= * J-Link software V6.47e or later: [https://www.segger.com/downloads/jlin...") |
(No difference)
|
Revision as of 16:40, 3 July 2019
This article describes device specifics of the Renesas RX72T series microcontrollers.
Requirements
- J-Link software V6.47e or later: Download
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files:
xxxxxxxxxxxxxxxxxxxxxxxx
Option-setting memory
Programming the option setting memory at addr. 0x12_0040 is supported.
User boot area
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is not suppored
Supported debug interfaces
The following debug interfaces are supported for the RX72T series:
- JTAG
- FINE