Difference between revisions of "J-Link cannot connect to the CPU"
(Created page with "Issue: After downloading an application, J-Link is not able to connect to the CPU This can have different reasons: * Application disables the debug interface * Application re...") |
|||
Line 7: | Line 7: | ||
* etc.... |
* etc.... |
||
+ | Preventing connection errors: |
||
− | Prevent: |
||
− | + | * Delay of 1 second at the start of a debug session, so in any case J-Link can halt the CPU before executing the "bad code" |
Revision as of 14:22, 13 August 2015
Issue: After downloading an application, J-Link is not able to connect to the CPU
This can have different reasons:
- Application disables the debug interface
- Application reconfigures debug pins
- Application enters some kind of low power mode
- etc....
Preventing connection errors:
- Delay of 1 second at the start of a debug session, so in any case J-Link can halt the CPU before executing the "bad code"